GRIP TM is a unique innovative high pressure NC balloon that has rows of focal knobs positioned across the the body of the balloon. The Focal knobs act as pressure points to treat difficult to crack plaque at the same time helping the balloon to grip, reducing the risk of slippage.  ...

This valve is design for haemostasis with multiple devices through the valve leaflets and can take very high pressures. We have used the valve during carotid stenting procedures and off label to provide a water tight seal for irrigation when using high pressure bags with a flexible ureteroscope....

Hiryu is a percutaneous transluminal coronary angioplasty (PTCA) dilation catheter used for angina and other treatment. According to the manufacturer, it has high pressure resistance (to enable the widening of hardened blood vessels) and capability in reaching peripheral blood vessels.

The HiWire hydrophilic guide wire from Cook Medical facilitates the placement of devices during diagnostic and interventional procedures. 

The IN.PACT Admiral Paclitaxel-eluting PTA Balloon Catheter from Invatec (now aquired by Medtronic) is designed for use in procedures of the superficial femoral artery. The IN.PACT Admiral has a dual-lumen shaft design, 6-folding balloon structure with "FLEXITEC" balloon material...

Lutonix DCB is a drug-coated balloon catheter that delivers paclitaxel to the arterial wall in a single, short inflation.  The device is similar to a standard angioplasty balloon but contains a special coating consisting of paclitaxel and a proprietary carrier that facilitates the...

The Maris Deep Infrapopliteal Self-Expanding Stent from Invatec (now aquired by Medtronic) is designed for use in peripheral vessel procedures. The Maris Deep is a 3.7F profile nitinol stent with OTW delivery system and 4F introducer sheath compatibility.  Infrapopliteal stenting...

The NanoCross device is designed to reach a destination with an enhanced OTW .014 balloon designed to cross smoothly and deflate quickly.

Hydrophobic patchwork coated balloon ensures a smooth crossing through tortuous vessels and across high grade stenosis whilst minimising the risk of slippage during inflation experienced using hydrophilic coated balloons. Infrapopliteal angioplasty literature on PubMed

The Passeo family of high performance, low profile balloons provides the best solution to all your workhorse and extremely challenging PTA angioplasties.      

Peripheral vascular cutting balloon from Boston Scientific This balloon has small cutting blades along its outer surface to help cut plaque and perform angioplasty. It uses a 0.018 inch wire and is available from 5 to 8mm diameters in a 2cm length. It requires a 6 or 7F sheath. There is...

This is a covered coronary stent from Biotronik. It has an external covering only giving it a lower profile and enabling 5F access.

The Pinnacle Destination Guiding Sheath consists of a guiding catheter and an introducer sheath. The variety of different curves allow access across the aortic bifurcation, to the renal arteries and other areas giving good support for selective catheters for stenting and embolisation. Two valve...

The PolarCath Peripheral Dilatation Device from Boston Scientific is designed for use in cryotherapy procedures for the treatment of obstructive lesions of PTFE access grafts or native arteriovenous dialysis fistulae, as well as in the peripheral vasculature (iliac, femoral, popliteal,...

The Pronto V4 extraction catheter is designed for the removal of fresh, soft emboli and thrombi from coronary and peripheral arteries as small as 1.75mm in diameter. The uniformly large extraction lumen and embedded longitudinal wire offer maximum extraction with enhanced deliverability and kink...

This is a paclitaxel coated balloon from Boston Scientific. It is available in 2-8mm diameters and 30-150mm lengths but not in all diameters. It uses a 0.018 inch platform and needs sheaths from 4-6F.  

The ReeFlex is a unique Catheter for treating severe occlusions of the SFA and other vessels of the lower limb via the contralateral approach.  The device  uses a modified version of the ClearStream KrossLock technology which transmits almost 100% of push from hub to distal tip...

The ReeKross is a PTA catheter designed with the capability of performing angioplasty on vessels with extreme occlusions in the arteries of the leg such as the SFA, iliac and tibial artery. According to the manufacturer, the device features a unique capacity for pushability to cope with...

According to the manufacturer, the Ryujin Plus rapid exchange balloon catheter is designed for percutaneous transluminal coronary angioplasty for improving myocardial blood flow in the localised stenotic lesion of the coronary arteries.  They say that the low profile enables the kissing...

According to the manufacturer, Scoreflex is a force dilatation balloon that comes with a dual wire system for dilatation under lower inflation pressure. They say that for optimal results, a gradual step-up inflation protocol should be adopted. Recommended applications for the device include...

The SilverHawk Plaque Excision Device works by removing the plaque that blocks arteries and interrupts blood flow. The SilverHawk technology uses a tiny rotating blade to shave away and remove plaque from inside the artery, instead of simply compressing it against the vessel wall. It can treat...

 This is a micro guidewire available in 0.010 and 0.014 inch diameters. Available lengths are 175 and 200cm. The wire has a soft coil tip of either 10 or 20cm and is aimed at distal vessel access.

The SOS Omni selective catheter features a soft, atraumatic, Super-radiopaque tip intended to reform in the thoracic aorta. The catheter should be pulled from the descending aorta into the abdominal aorta with a floppy Bentson-type guidewire “leading,” sometimes with a...

According to the manufacturer, t he Sterling Balloon Dilatation Catheter  is designed for percutaneous transluminal angioplasty in the peripheral vasculature, including iliac, femoral, ilio-femoral, popliteal, renal, and carotid arteries, and for the treatment of obstructive lesions of...

The device is an RX PTA Balloon catheter designed for carotid and renal interventions.  It has a low profile with 6 F compatibility and a wide inflation pressure range: (up to 17 atm for selected sizes).