The Cotavance paclitaxel coated balloon angioplasty catheter provides a paclitaxel coating process for controlled drug dosing. Paccocath technology is a proprietary drug matrix applied to the balloon of the angioplasty catheter consisting of paclitaxel and Ultravist 370, a radiologic...

According to the manufacturer, the Corsair is a hybrid catheter designed for crossing tortuous microchannels and easing the approach to complex lesions.  We have found it useful due to its tapered tip which helps to cross CTOs.

This device is a balloon-tipped guiding catheter designed for an occlusion test of the Carotid artery. Available in 6F and 8F, the distal balloon can perform a temporary occlusion and the large inner lumen allows an easy navigation for another catheter. The 6F version will expand from 5mm...

This is Cooks IVC filter retrieval kit. They say it is intended for retrieving/removing Gunther Tulip and Celect filters but in reality it could probably be used with any filter designed for removal with a hook on its top end eg ALN's filter. The kit is easy to use and the snare system is...

The Contour PVA Embolization particles are small and irregular flakes of polyvinyl alcohol, which are used for permanent occlusion within a blood vessel.    Read instructions for use from Boson Scientific, here .    

This high pressure balloon from Bard is rated at between 30 and 40 atm, 30 for the largest balloons. It is available from 4-12mm and up to 12cm in length

The Concerto detachable coil allows for precise placement of embolisation coils in the vascular tree. The coils come in a range of sizes from 2mm diameter (micro catheter compatible) to 50cm in length (standard catheter). The simple locking and deployment mechanism allows retrieval and...

The Coda Balloon Catheter from Cook Medical is designed for use in procedures intended to achieve temporary occlusion of large vessels, or expansion of vascular prostheses. It is commonly used for molding EVAR devices to form seal at the neck.

ClearWay RX is the name for a brand new atraumatic delivery methodology to enhance localised drug bioavailability and uptake while minimising systemic effect. This is accomplished by an thin, microporous PTFE balloon which controllably engages the vessel wall to occlude blood flow during...

ClearWay OTW Local Therapeutic Infusion Catheter is a micro-porous PTFE balloon catheter designed for the local delivery of various therapeutic agents into the peripheral vasculature. The device is a low pressure atraumatic infusion balloon that allows for enhanced drug bioavailability and...

This system was shown at CIRSE  2016, in Barcelona.   Dual power cells increase duration and run time, maintaining torque through tortuosity and i mproved drive shaft design increases efficiency of power transfer and torque. The device has FDA clearance.  It  is comprised...

The Chromis Deep Infrapopliteal Balloon-Expandable Stent from Invatec (now aquired by Medtronic) is designed for use in peripheral vessel procedures. The Chromis Deep is an ultra-low profile cobalt-chromium stent with OTW coaxial shaft delivery system and 0.014" guidewire compatibility....

 Cera Vascular Plug system    Great Biocompatibility, the  Titanium Nitride (TiN) coating prevents thrombosis and accelerates endothelialization.   Easy and Precise Deployment via the Micro screw connection   Fast and Complete Occlusion, PTFE...

10,12 and 14mm drug eluting balloons with a complete 360 degree coating of Paclitaxel protected with a hydrogel coating ensures these challenging stenosis can be treated effectively. Whether it is Graft edge stenosis, instent restenosis on arterial or venous side. Platfom 14 claim that their...

The Celon method (bipolar radiofrequency induced thermotherapy) is a procedure for the endovenous treatment of insufficient saphenous veins, in particular, the great saphenous vein. During this procedure veins are gently heated to temperature of 60° to 85°C using an ultra-thin RFITT...

This is a newer design that is based on the Günther Tulip filter and designed to be more easily retrievable. It is made of Conichrome® which is a cobalt- chromium-nickel-molybdenum-iron alloy. It has a single-cone design and incorporates secondary struts, designed to centre the filter...

According to the manufacturer, this closed-cell low-profile device is designed to provide tracking through tortuous anatomy.  The monorail delivery system allows rapid catheter exchanges.  They say that the Carotid Wallstent is the only carotid stent indicated for use in high...

A manual compression assist product, t he original Cardiva Boomerang Wire vascular closure device received FDA clearance in 2004. The next generation technology, Cardiva Catalyst II achieved FDA approval in 2007 and the device is also is CE Marked for distribution in Europe.  According...

Cook Medical's Cantata Microcatheteris used in small vessel or superselective anatomy for diagnostic and interventional procedures, including peripheral and coronary use. The device is now available in a 2.9 Fr size that has a high-flow, .027 inch inner diameter (ID) and is designed for access...

The Gore C3 EXCLUDER AAA Endoprosthesis is a relative new version of the Gore device. The device has infrarenal fixation and a simple deployment mechanism that allows repositioning by reconstraining the top of the graft (The delivery system is the new C3 system/handle, the device is...

The Bullfrog and Cricket Micro-Infusion Catheters are catheter-guided systems designed to inject — directly and non-systemically — therapeutic agents through blood vessel walls into deep tissues.  According to he maufacturer, therapies can be developed and delivered...

  BioMimics® 3D Vascular Stent System by Veryan Medical A peripheral self-expanding nitinol stent with a three dimensional (3D) helical shape. Laser cut from a straight nitinol tube the 3D helical shape is stored in the nitinol shape memory. 6Fr over-the-wire (OTW) stent...

According to the manufacturer, the BioFlo PICC has Endexo Technology (a permanent and no-eluting integral polymer) to provide a catheter which is more resistant to the accumulation of blood components. The device is FDA approved.  

The device features t wo free floating lumens which are independent of each other.  Flow rates are in excess of 450ml/min. A r etrograde insertion allows for accurate distal tip placement. The catheter is also  MRI compatible.

According to the manufacturer, the device is designed for the percutaneous Aspiration-Thromboembolectomy to ease the removal of thromboembolic material. Like most similar catheters it has a relatively large lumen for its size.