The HiWire hydrophilic guide wire from Cook Medical facilitates the placement of devices during diagnostic and interventional procedures. 

Hiryu is a percutaneous transluminal coronary angioplasty (PTCA) dilation catheter used for angina and other treatment. According to the manufacturer, it has high pressure resistance (to enable the widening of hardened blood vessels) and capability in reaching peripheral blood vessels.

This valve is design for haemostasis with multiple devices through the valve leaflets and can take very high pressures. We have used the valve during carotid stenting procedures and off label to provide a water tight seal for irrigation when using high pressure bags with a flexible ureteroscope....

GRIP TM is a unique innovative high pressure NC balloon that has rows of focal knobs positioned across the the body of the balloon. The Focal knobs act as pressure points to treat difficult to crack plaque at the same time helping the balloon to grip, reducing the risk of slippage.  ...

The Terumo Glidewire has a hydrophilic coating for smooth, rapid movement through tortuous vessels and crossability over difficult lesions.

The Glidecath 4 Fr Hydrophilic Coated Catheter has a  hydrophilic coated distal tip (15 cm) for smooth passage through tortuous vasculature. The device has a double-braided stainless steel mesh middle layer, a nylon-rich polyurethane inner layer and can accommodate...

The Fox sv PTA Catheter from Abbott Vascular is  designed for use in challenging peripheral vessel procedures. The Fox sv Catheter incorporates OTW (Over the Wire) design a low tip profile and rapid inflation/deflation times. Sizes 2-6mm, up to 120mm length. Inserted over 0.014 or...

The Flextome Cutting Balloon Device consists of a balloon with three to four microsurgical blades (atherotomes) mounted lengthwise on its outer surface. When the device is inflated, the atherotomes score the plaque by severing the elastic and fibrotic continuity of the vessel with tiny...

High pressure inflation device designed to exert pressure for balloon inflation and deflation. The Encore Inflation Device assists in controlled single step balloon inflation 20cc Inflation capability, complete with pressure gauge Large printed pressure gauge dial with finger latch mechanism...

This vascular simulator is a full size model of the human vascular tree, arteries and veins. There are puncturable 'ports ' at all the common vascular access points. Smaller sections of the model are also available.

 This product is distributed in the UK by BVM Medical, for supply outside the UK please consult the manufacturer.   DuraSheath DuraSheath is a new developed, percutaneous kink-free guiding sheath that combines a variable stiffness shaft and state of the art processing to provide an...

The Cotavance paclitaxel coated balloon angioplasty catheter provides a paclitaxel coating process for controlled drug dosing. Paccocath technology is a proprietary drug matrix applied to the balloon of the angioplasty catheter consisting of paclitaxel and Ultravist 370, a radiologic...

In the last 18 months Paclitaxel coating technology has advanced. Platform 14 use smaller drug crystals for a higher drug uptake and SV (sustained value) meaning the drug being active in the vessel wall for over a month. The comapany claims that no one has a more effective drug...

This high pressure balloon from Bard is rated at between 30 and 40 atm, 30 for the largest balloons. It is available from 4-12mm and up to 12cm in length

10,12 and 14mm drug eluting balloons with a complete 360 degree coating of Paclitaxel protected with a hydrogel coating ensures these challenging stenosis can be treated effectively. Whether it is Graft edge stenosis, instent restenosis on arterial or venous side. Platfom 14 claim that their...

The Baylis Powerwire distrubed in the UK by BVM is an RF enabled wire aimed at helping recanalisation of vessels. The wire is connected to a generator and the RF power can then be initiated for short bursts enabling te wire to slowly be advanced through an occlusion. It will be particularly...

The Bantam Florian 0.018" catheter is specially designed to make Dialysis PTA procedures easier and faster by offering a smooth handling and full control with options for contrast injection through the sheath and the distal catheter tip. It features a 45cm long shaft which precludes...

The Bantam PTA Catheter combines pushability, flexibility and trackability in a low profile 0.018 system for the treatment of lesions in the femoral and infrapopliteal arteries. According to the manufacturer, the Bantam is available with balloons up to 220mm in length allowing for potentially...

The Bantam Alpha PTA Catheter is a unique 0.014” OTW PTA Catheter for treating the most challenging infrapopliteal lesions. It is available in baloon lengths uf up to 220mm. Less balloon inflations are required in long lesions andf the device allows for shorter procedure times....

Cook Medical ATB Advance catheters have been designed for percutaneous transluminal angioplasty of lesions in peripheral arteries. The ATB Advance catheter is also intended for postdilatation of balloon-expandable peripheral vascular stents.

  A novel dual function angioplasty balloon which  enables multiple vascular procedures to be undertaken with just one dual function catheter potentially saving on time and costs. It  is the first dual functional balloon dilatation catheter that combines angioplasty and...

According to the manufacturer, this device is an entirely PTA catheter that offers excellent access and crossing performance for BTK cases. It is available in a broad range of sizes enabling treatment in a wide range of lesions. They say that is was was specifically designed to simplify BTK...

The Angioslide Proteus balloon catheter combines the features of an angioplasty device and an embolic capture device. The Angioslide's balloon is folded inwards after inflation, creating a natural negative pressure, which drives debris particles into the balloon lumen. The idea is that you...

   Co2 Angiography just got a whole lot easier Angiodroid is a  Carbon Dioxide Injector for Peripheral Interventional Angiography  below the Diaphragm. The Technology has been developed over the last 5 years in cooperation with Private and Public Hospitals as...

The Simbionix ANGIO Mentor family of products feature multidisciplinary simulators for hands-on practice during interventional endovascular procedures. The system comes in a range of sizes for all needs and budgets. According to the manufacturer, the device enhances percutaneous procedure...